How to import VMware images
If you already have a running virtual host on a VMware hypervisor, but would like to take advantage of the scalable hardware and MaxIOPS storage technology, it is possible to import VMware systems to UpCloud. To get your existing server running in the cloud you will need to upload the server image to a new cloud host, convert it to the RAW format, copy the converted image to a new storage drive, and reconfigure the host. This migration guide goes through each step in detail to help you transfer pre-existing virtual servers to the cloud.
Deploying a new server
To start off, log in to your UpCloud control panel and deploy a new server. You can choose whichever flavour of Linux you prefer, but for convenience, you could use the same distro as the system image you are migrating.
The new server will be used to download, convert and set up the image being imported. Consider the following when making the configurations:
- Selecting the location you wish to import the server
- Choose the configuration, the 1CPU and 1GB simple plan works fine
- Add a second storage disk by clicking the Add a new device button and choose the size, it can be scaled up later
- Pick the OS you are comfortable with for a one time boot
- Include any SSH keys you wish if available to allow password-free login
- Naming your server and giving it a description.
- Confirm your selections and click the Deploy button.
Once the configurations are done, hit the Deploy server button. Wait a few seconds for the server to start, then log into the newly deployed host to continue.
Update the system to make sure the software is running the latest versions.
# Debian and Ubuntu sudo apt-get update && sudo apt-get dist-upgrade -y # CentOS sudo yum update -y
With the new server up to date, check that both of the storage drives are attached and report their size correctly.
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT vda 253:0 0 25G 0 disk └─vda1 253:1 0 25G 0 part / vdb 253:16 0 10G 0 disk
Here the vda disk with a partition called vda1 is your primary storage and the vdb disk as the secondary device without partitions. If everything seems in order, continue with uploading to import VMware system image to your cloud server.
Importing VMware system image
Depending on your VMware hypervisor configuration the system storage disk might be stored in one or more files. The VMware virtual disk files are usually named the same as your virtual system and have a .vmdk file extension. You will need to copy the .vmdk files to the new cloud host, for example, using Secure Copy, SFTP or rsync.
You can find out about some of the different secure file transfer options in the first section Encrypt communications in the article for how to secure your Linux cloud server. Depending on your VMware system and your network connection it may be useful to compress the disk files for the transfer and then uncompress again on the target host.
Once you have finished uploading the system image files, you will need to convert them from a VMware image to the RAW format. The file format can be converted using the qemu-img utility available through the package managers on most Linux distributions. With Ubuntu and other Debian based systems, it is included in the qemu-utils package while on CentOS it can be installed by itself.
# Debian and Ubuntu sudo apt-get install qemu-utils # CentOS sudo yum install qemu-img
With the required utilities installed, convert the VMware image to RAW format with the command below. Replace VMware_image with the name of your VMware virtual disk file and the RAW_image with what you wish to call the new image file.
qemu-img convert -f vmdk -O raw VMware_image.vmdk RAW_image.img
Once the conversion is complete, copy the new RAW image content to the secondary disk. Replace the RAW_image with the converted disk file name just as above.
dd if=RAW_image.img of=/dev/vdb bs=16M oflag=direct
Afterwards, you can shut down the server and remove the old primary disk. Go to your UpCloud control panel and the Resize tab at your server settings. Once the server is in the stopped state, click the eject icon on the primary storage device to remove it. The second disk, where you just transferred the system image, will then be automatically set as the new primary device. In the same menu, you should also choose the disk controller.
VirtIO controller provides the best performance, but if you have issues starting the server, try IDE as it has better compatibility with different operating systems.
You can then restart the server again to continue configuring the system.
Reconfiguring the imported system
The newly transferred operating system should now work with the cloud server. However, depending on your old network setting you may need to use the Web Console log into the server and fix any issues before the system will connect normally. Go to your UpCloud control panel, open the Console tab under your server settings, and click Open the console connection.
Now, log in with the credentials for the imported VMware host as you did before transferring the server to the cloud. Once in, check the network settings with the following command.
UpCloud hosts have three network interfaces in the default configuration, public IPv4, private IPv4 and public IPv6 addresses, you might see something similar to the example output below. Here the first interface eth0 is working but the other devices are not yet configured.
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 6e:d7:1b:bf:18:29 brd ff:ff:ff:ff:ff:ff inet 184.108.40.206/22 brd 220.127.116.11 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::6cd7:1bff:febf:1829/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 6e:d7:1b:bf:e6:f2 brd ff:ff:ff:ff:ff:ff 4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 6e:d7:1b:bf:61:a8 brd ff:ff:ff:ff:ff:ff
Edit your network configuration files to match the network interface names listed in the command output. For example on Ubuntu and other Debian-based systems use the command below to open the configuration file.
sudo nano /etc/network/interfaces
Add the following sections to the file. If the network interfaces on your server are named differently, use those names instead of eth0, eth1, etc.
auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet dhcp auto eth2 iface eth2 inet6 auto
On CentOS and other Red Hat variants, the network interfaces are configured in individual files. These files are stored in the /etc/sysconfig/network-scripts/ directory, check the file names with the command below.
ls /etc/sysconfig/network-scripts/ | grep ifcfg-
Then open the first interface file for edit, for example, ifcfg-eth0.
sudo vi /etc/sysconfig/network-scripts/ifcfg-eth0
The file should read at least the following settings. In case, ONBOOT is set to no, change it to yes and save the file.
DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes
You may need to do the same operation to other network interfaces, or simply create new configuration files if your old system only had one or two interfaces.
Afterwards, reboot the server and try logging in with SSH. If the network is working you can start using the new host as before with the added benefit of the freely scalable system resources and faster than SSD storage disks with MaxIOPS technology.
Congratulations, your imported VMware system should now be up and running on a brand new cloud host. In case you have any further problems with the network, you can find additional help with troubleshooting the connectivity at the guide about network issues with Linux host.
Also, if you run into issues with booting from the migrated system image, you can always attach the old primary disk again and find the uploaded VMware disk stored safely for another try without the need to wait for the image to upload again. Once you are confident that the imported system is running properly, you can go to the Storage menu at your UpCloud control panel and delete the unnecessary storage device.